Content:
1 piece End distribution dripper without accessories
The end distribution dripper is a drip nozzle as an accessory to the Tropf-Blumat and is placed as the closing at the last point of a drip chain (see distribution dripper).
The water comes out below the head of the screw, the screw should reduce the pressure over the thread so that the drip quantity at each distributor drip is approximately the same. The screws should be screwed in all the way, but intermediate positions can certainly increase the drip quantity.
It is also recommended here to fix the end distribution dripper with a support. The advantage of this is that several distribution drippers can be aligned in one plane for a horizontal arrangement, the drippers do not lie on the ground, they remain cleaner and they are easier to control.
Also the end drippers have to be checked occasionally for continuous function - lime deposits and algae formation have to be taken into account - an annual cleaning, preferably with citric acid, is advisable.
The connection is made using the plug-in method, tightness up to max. 1 bar pressure, connection grommets 1x 3.5 mm.
Material: polyamide + polyethylene plastics, dimensions: 25x17x12 mm, shank diameter 7.5x10 mm
Connections: 3508 Drip hose 3 mm
Accessories: 4301 end distribution drip tube, 4306 end cap 3 mm, 2253 end cap 3 mm, 4305 support
