Content:
1 piece distribution dripper without accessories
The distribution dripper is a drip nozzle as an accessory to the Tropf-Blumat and is connected to the 8 cm overhanging end of the drip tubing. The water comes out below the screw head, the screw should reduce the pressure over the thread so that the drip quantity is approximately the same at each distributor drip. The screws should be screwed in all the way, but intermediate positions can certainly increase the drip quantity.
Several distribution drippers can be connected to each other in a strand - with approx. 20-30 cm drip tubing as a spacer but a maximum of 5 pieces as a 'drip chain' - whereby it is recommended to fix the distribution drippers with a support. The advantage of this is that the distribution drippers can be aligned in one plane for a horizontal arrangement, the drippers do not lie on the ground, they remain cleaner and they are easier to control.
The last distributor dripper is sealed with a cap or, alternatively, an end distributor dripper is inserted.
The distribution drippers must be checked occasionally for continued function - limescale deposits and algae formation must be taken into account - annual cleaning, preferably with citric acid, is advisable.
The connection is made by the plug-in method, tightness up to max. 1 bar pressure, connection grommets 2x 3.5 mm.
Material: polyamide plastic, dimensions: 25x25x12 mm, shank diameter 7.5x10 mm
Connections: 3508 Drip tubing 3 mm
Accessories: 4306 Closing cap 3 mm, 2253 End cap 3 mm, 4305 support
